Amw 2523 TP

2523 TP Highlights

Jan 4, 2019: Since the market demand for tipper trucks are so high, AMW bringing up newer and better models isn’t new. This 2523 TP is what could be seen as a high-performance tipper since it has a very powerful engine under the hood.

Though it uses the same 5.9-litre turbocharged 6-cylinder engine, it makes a better 235 bhp of power at a lower 2,200 rpm along with a higher peak torque of 836 Nm coming at the same 1,500 rpm. The maximum first gear speed can go up to 36 kmph, which makes life easier for the driver to take on the rock-filled road.

Amw 2523 TP Tipper- Expert Review

AMW 2523 TP – EXPERT REVIEW

Overview

The perfect combination of productivity and profitability suited for all off-road load challenges, AMW 2523 TP is the ideal vehicle for the Indian trucking industry. Built to address the unique needs of Indian businesses, the vehicle assures low maintenance costs and great fuel efficiency.

Fitted with advanced technology and best-in-the-market equipment, AMW 2523 TP boasts of high performance, durability, and dependability on Indian roads. The vehicle is capable of traversing even uneven terrain. Progressive engine, technically superior suspensions and brakes make the vehicle a perfect buy for all smart trucking needs.

Specs

Engine & Displacement: Cummins - B5.9 215HP, DI - TurboCharged after Cooled, 5883 cc

Gross Vehicle Weight (GVW): 25000 kgs

Wheelbase & Turning Radius: 4300 mm & 4405 mm

Engine and Performance

AMW 2523 TP is equipped with a top of the line 5.9 litre, 6-cylinder, in-line diesel engine that generates a maximum power of 158 KW (235 BHP) @ 2500 Rpm and maximum torque of 836Nm @ 1500 Rpm. The engine complies with Euro III norms and is fitted with a turbocharger and intercooler. Plateau-honed cylinders prevent excessive oil consumption. Also, the unitized block design has 40% lesser parts, helping save maintenance costs. The vehicle has a 5883 cc displacement and a maximum speed of 80 km/hr. The 220 litres fuel tank eliminates the hassles of refueling over and over during long trips. A high gradeability of 36% allows easy maneuverability while navigating inclined roads, basements, and bridges.

Vehicle Built and Load Capacity

The vehicle has overall dimensions of 7110mm x 2370mm x 2780mm. A Gross Vehicle Weight of 25000kgs supports a high payload capacity of 12450kgs. The ZF fully synchronized gearbox offers comfortable and distinct gearshifts without vibration or noise, thus enhancing performance and fuel efficiency. The heavy-duty tandem drive hypoid axles with greater thickness and bigger housing come with bolted design that eliminates welding stress and makes servicing easy.

Handling and Suspension

Heavy-duty AMW 2523 TP incorporates cutting-edge technology that makes handling the vehicle an easy task. The low crawler-gear ratio improves engine start-up, even with heavy loads and difficult driving conditions. The power-assisted clutch is 380mm in diameter and ensures effortless gear shifting, longer life and reduced slippage. Upgraded suspension and multi-leaf front and rear springs permit high deflection, giving good rising comfort. An optimized wheelbase with wide angle front axle offers smoother navigation and smaller turning radius.

Braking and Safety

Highly efficient braking and safety system assures dependability on the road. The vehicle is fitted with 200mm wide brake linings that ensure endurance of heavy wear and tear. The exhaust brake comes with a butterfly-type design for better vehicle control while driving downhill and the adjusted differential between axles improve grip on slippery and uneven roads. Power steering makes navigation easy. AMW 2523 TP is also equipped with fog lights to navigate extreme weather conditions. Three-point inertia seat belts for driver and co-driver, and integrated under-run protection device increase the safety levels of the vehicle.

Design and Comfort